Share Product

Auto Cooling System

Topstar's cooling system is divided into two types. The water chiller uses a shell-and-tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide chilled water at 5~35℃, and the low-temperature type can be as low as 3℃. The air chiller uses a fin-type condenser, which has fast heat conduction and good heat dissipation effect and does not require cooling water. It can provide chilled water at 5~35℃, and the low-temperature type can be as low as 3℃.

Features

1. It uses imported high-quality compressors and imported water pumps, which are safe, quiet, power-saving and durable.
2. Both water chillers and air chillers use full computer temperature controllers, which are simple to operate and can accurately control the water temperature at 5-35℃.
3. Both use current overload protection, high and low voltage control and electronic time delay safety devices, which will promptly issue an alarm and display the cause of the fault when a fault occurs.
4. The temperature of the ultra-low temperature chiller can reach below -10℃.
5. This series of chillers can be customized to be acid-resistant and alkali-resistant.

Application Industries

1. Electronics
2. Containers
3. 3C home appliances
4. Cosmetics
5. Auto parts
6. FMCG

Send Inquiry Category Brochure

Adequate supply of goods, available for delivery within 35 days.

Description

The low-temperature cold water produced by the chiller can cool down the hydraulic oil and mold of the injection molding machine. With its assistance, it can cool quickly and improve efficiency; it can make the physical strength and internal stress of the injection molded parts reach the optimal state, thereby improving the mechanical properties and durability of the product. At the same time, the cooling process can also significantly improve the product's surface finish, avoid defects caused by overheating of the material, and thus improve product quality.

Topstar's chillers are divided into air Chillers and Water Chillers. Both have advanced refrigeration circuit designs. The full computer temperature controller can accurately control the water temperature at 5-35℃. The compressor power is 5HP-50HP, and the cooling capacity can reach 13416~130720Kcal/hr. Cooling is faster, and it is widely used in injection molding, blow molding, extrusion and other industries.